IP 4door module
The IP 4 Door Controller is a standalone unit. Using Insight software, an unlimited amount of IP 4 Door Controllers can be managed as a single system.
- Four doors via four card readers (Expandable to 8 card readers with 2 x 995012)
- Provides general purpose zone inputs, siren outputs and strobe outputs
- 10,000 Users (expandable on request)
- Connect up to 4 LCD Terminals to RS485 LAN to provide PIN code and additional user operations
- No limit on the number of concept IP door controllers that can connected
- Soft or Hard Anti-Passback that functions across all doors
- Dual User requirement and Card and PIN requirement
- Free Access options via Time Zones, Area, Status etc.
- Extended door access times for disabled users
- Four onboard lock relays
- Separate valid, invalid and Door Open Too Long (DOTL) output for each door
- Separate read, tongue, request entry, request exit inputs for each reader
- All card reader interfaces operate with common magnetic swipe and Wiegand readers without the need for any additional interfaces
- Onboard review buffer for offline operation
- Each card reader may be independently configured, allowing a combination of card reader technologies
PHYSICAL |
|
Cabinet Dimensions |
640(L) x 320(W) x 112(D) (mm) |
Installation Environment |
0grdC - 40grdC @15 - 85% Relative humidity (non-condensing) |
ELECTRICAL |
|
Power Supply Input |
240VAC 50Hz |
Operational Power |
16.5VAC 50Hz |
Max |
500mA |
Fuse Protection |
500mA |
INPUTS |
|
Zone Inputs |
16 General purpose zone inputs |
Door Inputs |
Door Reed, REX, REN, Tongue Sense per door |
Reader Ports |
4 (Expandable to 8 using 2 x 2 Door Access Modules) |
OUTPUTS |
|
Door Outputs |
Valid, Invalid and DOTL per door |
Relay |
4 (Typically used for door locks) |
Physical Auxiliaries |
2 |
|