Products
Senzori conventionali
NB-326S-2

NB-326S-2

EN 54 approved
2 wire smoke detector
more
NB-326SH-2

NB-326SH-2

EN 54 approved
2 wire smoke + heat detector
more
NB-326H-2

NB-326H-2

EN 54 approved
2 wire heat detector
more
NB-138R-12

NB-138R-12

Water detector
• 100mm x 62mm x 35mm
• 68g without battery
• 9V alkaline (not included)
• 72 hours of continuous use (Up to two years depending on use)

more
SLR-E3N

SLR-E3N

Conventional Photoelectric Smoke Detector
Fully compatible with the majority of existing Conventional systems. The SLR-E3N is available in ivory / white
Hochiki
more
DCD-AE3

DCD-AE3

DCD-AE3 is a Conventional Rate of Rise Heat Detector
with a 60°C fixed temperature element using
a thermistor and linearising circuit to provide an accurate linear response Heat Detector.
Hochiki
more
DCD-CE3

DCD-CE3

Model DCD-CE3 is a Rate of Rise Heat Detector with a 90°C fixed temperature element
using a thermistor and linearising circuit to provide an accurate linear response Heat Detector.
The DCD-CE3 is supported by a wide range of bases for different applications and these are supported on the majority of conventional systems.
Hochiki
more
DFJ-AE3

DFJ-AE3

Model DFJ-AE3 is a 60°C Conventional Fixed Temperature Heat Detector using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. A third terminal provides
integral remote indicator output.
Hochiki
more
DFJ-CE3

DFJ-CE3

Model DFJ-CE3 is a 90°C Conventional Fixed Temperature Heat Detector using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.
Hochiki
more
DRD-E

DRD-E

The DRD-E is a flame detector designed for internal use to detect large flames.
The detector fits any of the CDX range of mounting bases. The detection zone is a 90° cone and the detection range is up to and including 25m.
Hochiki
more
YZU-A

YZU-A

The YZU-A is an angled ceiling bracket specifically designed for the DRD-E Infra-Red Flame Detector.

(Note: Image shows YZU-A fitted with a YBN-R/6 standard conventional base - sold separately).
Hochiki
more
YZU-B

YZU-B

The YZU-B is a fixed angle wall bracket designed specifically for use with the DRD-E Infra-Red Flame Detector where the detector cannot be fixed to a ceiling surface.

Requires a mounting base for the DRD-E detector
Hochiki
more
YBN-R/6

YBN-R/6

Conventional Mounting Base
Model YBN-R/6 is a Conventional Detector Mounting Base associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.
Hochiki
more
YBO-R/6R

YBO-R/6R

Conventional Relay Base Latching
Model YBO-R/6R is a Conventional Detector Mounting Base associated with the New CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm and security control panels.
Hochiki
more
YBO-R/6RN

YBO-R/6RN

Conventional Relay Base Non-Latching
Model YBO-R/6RN is a Conventional Detector Mounting Base associated with the New CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm and security control panels.
Hochiki
more
YBO-R/6RS

YBO-R/6RS

Conventional Schottky Relay Base Latching
Model YBO-R/6RS is a Conventional Detector Mounting Base associated with the New CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.
Hochiki
more
NB-326S-2 :: NB-326SH-2 :: NB-326H-2 :: NB-138R-12 :: SLR-E3N :: DCD-AE3 :: DCD-CE3 :: DFJ-AE3 :: DFJ-CE3 :: DRD-E :: YZU-A :: YZU-B :: YBN-R/6 :: YBO-R/6R :: YBO-R/6RN :: YBO-R/6RS
Emporium - distribuitor exclusiv PARADOX2 ani garantieshopitec