| Mains supply |
110-130 VAC or 220-240 VAC |
| Bus Voltage |
24VDC typical |
| Current at 24Vdc per PSU |
1.8 A |
| Main board current draw |
Standby |
112 mA |
| Alarm |
350 mA |
| Zones Expansion Module current draw |
Standby |
60 mA |
| Alarm |
220 mA |
| Relays Expansion Module current draw |
Standby |
40 mA |
| Alarm |
230 mA |
| Keypads current draw |
Standby |
25 mA |
| Alarm |
110 mA |
| Auxiliary output |
24VDC +/- 10%, 800 mA max, current limited, monitored |
| Batteries |
2x 12V, 7Ah sealed lead acid gel, self regulated |
| Battery replace |
Resistance Greater than 3 Ohms ±10% |
| Zone Inputs Voltage |
16.3 VDC ±10%, 0,5 V max ripple voltage |
| Zone Reset Operation |
0,5 VDC max voltage, duration 3,1 sec |
| Max total detector’s standby current per zone |
15 mA |
| Max Zone Input Ratings |
10 Ohm max Wiring resistance, 5uF max capacitance |
| Signaling devices outputs |
24VDC ±10%, 1A max, fused and monitored |
| Fault relay contacts rating |
Dry contacts (NO/NC) 30 VDC, 3 Amps |
| BUS system |
4-wire RS485 bus system |
| Bus Max capacitive load |
400 nF |
| Bus max length |
1200m using typical RS485 cables |
| Main board zones |
8 zones (configurable as 8 normal zones, 8 intellizones, 2 cross-zone areas) |
| Expansion Zones |
Up to 8 expansion boards of 8 zones each (total 72 zones with main’s panel) |
| Expansion Relays |
Up to 9 expansion boards of 8 relays each (total 72 relays) |
| Expansion Keypads |
Up to 8 keypads.
2 models of keypads currently exists (long type and stand alone type) |
| Communicator |
Build-in DTMF communicator supports Ademco C.I.D. format |
| Module address allocation |
Addressable expansion modules. Addresses are selected with the on-board dip-switch. |
| Environmental |
Class A temperature range: -5 to 40 °C (23 to 104 °F). Humidity: 5 to 95% RH, non condensing |
| Terminal blocks rating |
All terminals rated for 12 to18 AWG (0.75 to 2.5 sq mm) |
| Dimensions (HxWxL [cm]) |
Main unit: 31 x 45 x 9 (Fighter MP/MPR, KZRPS, KZPS, KRPS, ZRPS, ZPS)
Expansion modules (small box): 17 x 32 x 5 (models EKZ, EKR, EXZ, EXR)
Stand Alone LCD keypad KSDA: 15,5 x 11 x 2,82 x 5 |
andEN
